Support Guide

HP Printer Error Codes & Troubleshooting

Practical first-step diagnostics for the HP LaserJet, DesignJet and OfficeJet errors we see most often in Jeddah offices — and when to call an engineer instead.

HP LaserJet 49.xx.xx — Firmware Error

A corrupted print job or outdated firmware locks the formatter board.

  1. Turn the printer off, wait 30 seconds, then power it back on.
  2. Clear the print queue on every computer sending jobs.
  3. Update the printer firmware from HP's official support site.

HP LaserJet 50.x — Fuser Error

The fuser unit is overheating, under-heating or nearing end of life.

  1. Power the printer off for 20 minutes to let the fuser cool.
  2. Reseat the fuser unit and check for jammed paper fragments.
  3. If the code returns, the fuser assembly needs replacement.

HP LaserJet 79.xx.xx — Service Error

A network job or add-on accessory is crashing the formatter.

  1. Disconnect the network cable and restart the printer.
  2. If the error clears, remove and re-add the printer driver.
  3. Remove third-party memory or EIO cards one at a time to isolate the fault.

HP LaserJet 13.xx.xx — Paper Jam

Paper is stuck in the input tray, fuser or duplexer path.

  1. Open every door and remove paper by pulling in the direction of travel.
  2. Inspect pickup and separation rollers for wear or glazing.
  3. Fan the paper stack and confirm the tray guides match the media size.

HP DesignJet 21:10 / 22:10 — Service Station Error

The service station or ink carriage cannot move to its home position.

  1. Power the plotter down from the rear switch and restart.
  2. Check for obstructions along the carriage rail and clean the encoder strip.
  3. Persistent codes usually mean the service station assembly needs service.

HP DesignJet 79:04 — Firmware Error

The plotter firmware hit an unexpected state, often after a large CAD job.

  1. Restart the plotter and cancel any queued jobs from the embedded web server.
  2. Update to the latest DesignJet firmware release.
  3. Re-send the job as PDF instead of HP-GL/2 to test for job corruption.

HP OfficeJet 0x610000f6 — Printhead Failure

Clogged or electrically failed printhead contacts.

  1. Remove the printhead, clean the contacts with a lint-free cloth, and reseat it.
  2. Run the automatic printhead cleaning cycle twice.
  3. If the code persists, replace the printhead assembly.

Printer Offline / Not Responding on Network

IP address change, sleep-mode dropouts or driver port mismatch.

  1. Print a network configuration page and confirm the IP address.
  2. Assign a static IP or DHCP reservation for the printer.
  3. Update the driver port on each workstation to the correct IP.

Still showing an error?

Hardware faults such as fuser, formatter or printhead failures need trained hands. Our field engineers carry genuine HP spare parts and reach most Jeddah locations the same business day.